During the transportation of Weifang diesel generator set, we may encounter the problem of disassembly, not only the maintenance of the diesel generator set, we also need to dismantle some parts when we transfer the generator set to the workplace, the disassembly of the diesel generator set Some parts can not be disassembled, because there is water circulation and lubricating oil inside the generator set, when we repair the generator set, we must carefully observe the component position of the diesel generator set, and the precautions for disassembly of the diesel generator set, below Feng Yue Xiaobian will briefly introduce to you the precautions for the disassembly of the generator set:

1. After the diesel generator set is stopped or when the test machine is used, when the external surface of the machine body still has a residual temperature, it means that the inside has not been completely cooled down. The Weifang diesel generator set is used as a backup power supply, which has low fuel consumption, low noise and structure. Features such as compactness. Otherwise, due to the influence of thermal stress, it will cause permanent deformation of the cylinder block and cylinder head and other mechanical parts, which will affect the various performances of the internal combustion engine.

2. When disassembling the cylinder head, connecting rod bearing cap, main bearing cap and other parts, the loosening of the bolts or nuts must be disassembled 2-3 times in a certain order and symmetrically and evenly. Never loosen the nuts or bolts on one side and loosen on the other side, otherwise, the parts will be deformed due to the uneven force of the parts, and some may even be damaged by cracks.

Conscientiously do a good job of checking signs. Generator set manufacturers convert other forms of energy into mechanical equipment, which is converted from generator to electrical energy. Timing gears, pistons, connecting rods, bearing bushes, valves and related adjustment gaskets are marked with marks, and those without marks should be marked. The mark should be marked on the non-working surface that is easy to see, and the assembly datum surface should not be damaged, so as to maintain the assembly relationship of the crude oil of the machine as much as possible.